IS WT fitting CERAPLUS 2, Grande o.Ablgarn., Ausld. 123mm, chrome
IS WT fitting CERAPLUS 2, Grande o.Ablgarn., Ausld. 123mm, chrome
Couldn't load pickup availability
Single lever wash basin Grande fitting DN 15. Rigid, self-draining, nickel-free spout, with vandal-proof jet breaker (low aerosol). Projection 123 mm. Spout height 103 mm. Nickel-free flexible connection hoses. Metal operating lever, length 110 mm with permanent red/blue marking on the lever. Fastened from below (Easy Fix) with centering seal. 8.4 litre/minute flow regulator. D: 38 mm cartridge with ceramic sealing discs. Cartridge ratio made of stainless steel. Swivel range 100 degrees. Tested for 500,000 cycles (one cycle consists of a total of 11 different lever movements). Integrated grease reservoir (food-safe). Integrated hot water temperature limiter. Lifespan test EN 817. Noise behaviour DIN 4109, Group 1. Surface: Chrome Flow rate (3 bar): 8.4 litres Projection: 123 mm Total projection: 159 mm Total height: 208 mm Manufacturer: Ideal Standard Series: Ceraplus 2 Article no.: BC100AA
Color (detail) | chrome |
Mounting type | Plate/fitting hole |
Accent color | Without |
surface | Chrome plated |
Surface treatment | Other |
Connection flow | Hose (screw connection) |
Base color | Chrome look (glossy) |
Locking mechanism | Cartridge ceramic |
Connection dimension supply | 3/8 inch |
Material tap | Brass |
Temperature limitation | Yes |
Number of handles | Intrusive |
Low pressure version | No |
Execution Process | Firmly |
Total installation height (mm) | 208.0 |
Including handles | Yes |
Number of fitting holes | 1-hole |
Projection (mm) | 123.0 |
Thermostatic | No |
With couplings | No |
Projection runoff (mm) | 123.0 |
Water saving position | No |
Mouthpiece faucet | Aerator |
Installation height lower edge tap outlet (mm) | 103.0 |
With shut-off valve for connection of external devices | No |
Discharge type | Cast |
With hot water saving function | Yes |
With rosettes/cover plate | No |
With hand shower | No |
Backflow protection according to EN 1717 | Other |
Noise class according to DIN-52 218 | Group I,<= 20 dB(A) |
Max. dispensing capacity (at 300 kPa) (l/s) | 8.4 |
Provided with | Device for drain plug |
Share

